Shaver Sockets

Upgrade your grooming routine with our range of shaver sockets designed to provide convenient and efficient charging solutions for your electric shavers and other grooming devices.

Shaver plug socket FAQs

What is a Shaver Socket?

 A shaver socket is a specialised electrical outlet designed for charging electric shavers and other low-powered grooming appliances. 

These sockets typically feature a transformer to provide a low-voltage supply for safe and efficient charging.

How Does a Shaver Socket Work?

Shaver sockets work by converting standard electrical supply voltage to a lower, safer voltage suitable for electric shavers. 

The socket is equipped with a built-in transformer to ensure the proper power output for charging grooming appliances.

How to Fit a Shaver Socket?

 Fitting a shaver socket involves the following steps:

• Turn Off Power: Turn off the power at the circuit breaker to ensure safety during installation.
• Remove Old Socket: Unscrew the cover plate and remove the old socket.
• Connect Wires: Connect the wires to the corresponding terminals on the shaver socket. Follow the manufacturer's instructions or consult a qualified electrician if needed.
• Secure Shaver Socket: Attach the shaver socket to the wall, secure the cover plate, and restore power.

Are Shaver Sockets Universal?

Shaver sockets are a standard feature in the UK and some other countries, but their design and voltage may vary. 

It's essential to ensure compatibility with the specific voltage and plug type used in your region.

Can You Charge Toothbrushes in a Shaver Socket?

Yes, shaver sockets are suitable for charging toothbrushes and other low-powered grooming devices. However, it's essential to check the voltage requirements of your toothbrush and ensure compatibility with the shaver socket.

Can I Plug a Hair Dryer in a Shaver Socket?

 No, shaver sockets are not designed for high-powered devices like hair dryers. Hair dryers require a higher voltage and wattage, and attempting to plug them into a shaver socket may damage both the device and the socket.

Does a Shaver Socket Need a Fused Spur?

Yes, shaver sockets typically require a fused spur for safety and compliance with electrical regulations. 

The fused spur provides additional protection and control over the electrical supply to the shaver socket.

Does a Shaver Socket Need an Isolator?

While not always required, installing an isolator switch for a shaver socket is a recommended safety feature. 

The isolator allows you to completely disconnect power to the shaver socket when not in use, enhancing safety during maintenance or when the socket is not needed.

Why Are Shaver Sockets Dual Voltage?

Shaver sockets are often dual voltage to accommodate different grooming appliances with varying voltage requirements. 

This feature ensures compatibility with a range of shavers and grooming devices, making the socket more versatile.

Why Does My Shaver Socket Buzz?

 A buzzing sound from a shaver socket could be due to electrical interference, loose wiring, or a faulty transformer. 

If you experience persistent buzzing, you should talk to a qualified electrician.

Does a Shaver Socket Need Its Own Circuit?

In most cases, a shaver socket does not need its own dedicated circuit. 

However, it should be wired according to electrical regulations and may share a circuit with other low-powered bathroom devices, provided the circuit is appropriately rated.

How Close Can a Shaver Socket Be to a Toilet?

 According to electrical safety regulations, shaver sockets should be installed at a safe distance from water sources, including toilets. 

It is recommended to follow the guidelines provided by the manufacturer and consult with a qualified electrician to ensure compliance with safety standards.