Hamilton IDTESC Dimmer Switch Kit Push On/Off Multi-Way 250W Trailing Edge IDTESC

Face plate must be earthed. Internal Use Only. Trailing Edge Technology Dimmers are suitable for control of both resistive and inductive loads. When used for dimming low voltage electronic halogen transformers it must be noted that the dimmer controls the primary side of the transformer. Tungsten filament GU10 lamps must be branded with a fuse base. When using mains voltagehalogen lamps- dimmers should be de-rated by 25%. When dimming LED lamps de-rated by 75% - please contact our Technical for compatibility. When using mains voltage halogen load transformer - maximum rating is 210VA. NOTE: For multi-way switching a push to make retractive switch should be installed in the other positions. • Module Dimensions H: 60.6mm W: 23mm D: 32.6mm • Generic Size: Module • Switched Poles: Single • Wattage: 250W Resistive 210VA Inductive • Current Rating: 1.1 Amp • Voltage: 220/250V AC • Maximum Load 250W Resistive 210VA - Inductive Min Load 25W/25VA • Mains Frequency: 50Hz • IP Rating: IP2XD • Standard/Approval: BS EN 60669-2-1